2026-08-14 V1.3.1.0 [Features] 1. Maximum load capacity: 512×512 pixels 2. Up to 1/64 scan 3. Up to 40 groups of parallel data, 64 groups of serial data (expandable to 128 groups of serial data). (Note: physical load capacity) 4. Color management 5. 22bit+ 6. Full-grayscale 2.0 7. Pixel level brightness and chroma calibration 8. Quick adjustment of dark or bright lines (Note: Supports adjustment without an input source, and supports independent on/off control.) 9. Seam correction with cameras 10. Low latency (Note: Low latency is enabled by default, and non-low latency is not supported.) 11. 3D (Note: The load capacity will be reduced by half.) 12. Individual gamma adjustment for RGB 13. Image rotation in 90° increments 14. Free image rotation 15. HDR function 16. Display of 3-color 16-point serial input 17. Smart module (dedicated firmware required.) 18. Automatic module calibration 19. Module flash management 20. One click to apply calibration coefficients in module flash 21. Mapping function 22. Settings of a stored image in the receiving card 23. Temperature and voltage monitoring 24. Cabinet LCD (Note: Only 5-Pin LCD is supported.) 25. Bit error detection 2.0 26. Firmware program readback 27. Configuration parameter readback 28. Dual card backup and status monitoring 29. Loop backup 30. Dual backup of configuration parameters 31. Dual program backup 32. No rectangle restriction (Note: Works with all-in-one controllers.) 33. Adjustable EMC (Note: Works with LCT 5.4.8 or later.) 34. Input source supports 10bit/12bit. (Note: 1. When used with a M3 sending card, 10-bit/12-bit sources support a load capacity of 512×384 pixels. 2. With a COEX sending card, 10-bit sources support a load capacity of 512×512 pixels, while 12-bit sources support a load capacity of 512×384 pixels.) 35. Thermal Compensation 2.0 36. NCP backup and recovery 37. Multi-mode 38. Cabinet painter 39. Smart power supply [Others] [Driver Chips] MBI series: MBI5268 SUM series: SM16389SF, SM16389, SM16169SH (SM16380SH, SM16380SW, SM16169SW, SM16386) DP series: DP3264 (DP3256), DP3265 (DP3356, DP3364), DP3368, DP3254 (DP3252, DP3153) ICN series: ICN2055 (ICN1069), ICN2065 (FM6565), ICN1065S, ICN2069 (FM6565), ICN3065, ICN1065L CFD series: CFD555A, CFD555B, CFD535A (CFD555B) FM series: FM6864 (MBI5264) [Decoder Chips] RT series: RT5953, RT5958 ICN series: ICN2018, ICN2019 Common decoder chips: static, pass-through, 74HC595